DocsPlus Universal for Windows / Mac

For subscriptions purchased after November 2020.


How can I share my DocsPlus files?

You'd like to share your DocsPlus files between devices or send them to other people.

How do I activate via command line?

The software is installed but not activated on multiple Windows computers. This may be because the automatic activation was unsuccessful during installation. It may be because the software was included in a system image that was applied to client computers.

Resolution

Activation is performed by CrickActivate.exe in the software's Program Files folder.

It connects to activate.cricksoft.com/activate via HTTPS (Port 443).

You can use a logon script, Scheduled Task, Group Policy, or similar to run this program via command line on each workstation.

The following parameters must be used:

-serial   Your serial number (see examples).
-silent   The activation attempt won't display any messages.

The following parameters can be used if required:

-proxy   The address of a proxy server.
-user     The username to use when accessing the proxy server.
-pass     The password to use when accessing the proxy server.

Clicker 8 example:

"C:\Program Files (x86)\Crick Software\Clicker 8\CrickActivate.exe" -silent -serial "8XXXX XXXXX XXXXX XXXXX"

DocsPlus example

"C:\Program Files (x86)\Crick Software\DocsPlus\CrickActivate.exe" -silent -serial "2XXXX XXXXX XXXXX XXXXX" -proxy "10.0.0.254:8888" -user "myusername" -pass "mypassword"

About this article
Published
8th November 2017
Last revised
13th December 2019
Applies to
  • Clicker 7
  • Clicker 8 for Windows / Mac
  • DocsPlus for Windows / Mac
  • DocsPlus Universal for Windows / Mac
Keywords
  
  

How do I activate via command line?

Nov 8, 2017, 16:04 PM
Article ID :
Priority : Normal
Type of article : How do I
Last revised : Dec 13, 2019, 00:00 AM

The software is installed but not activated on multiple Windows computers. This may be because the automatic activation was unsuccessful during installation. It may be because the software was included in a system image that was applied to client computers.

Resolution

Activation is performed by CrickActivate.exe in the software's Program Files folder.

It connects to activate.cricksoft.com/activate via HTTPS (Port 443).

You can use a logon script, Scheduled Task, Group Policy, or similar to run this program via command line on each workstation.

The following parameters must be used:

-serial   Your serial number (see examples).
-silent   The activation attempt won't display any messages.

The following parameters can be used if required:

-proxy   The address of a proxy server.
-user     The username to use when accessing the proxy server.
-pass     The password to use when accessing the proxy server.

Clicker 8 example:

"C:\Program Files (x86)\Crick Software\Clicker 8\CrickActivate.exe" -silent -serial "8XXXX XXXXX XXXXX XXXXX"

DocsPlus example

"C:\Program Files (x86)\Crick Software\DocsPlus\CrickActivate.exe" -silent -serial "2XXXX XXXXX XXXXX XXXXX" -proxy "10.0.0.254:8888" -user "myusername" -pass "mypassword"
Product Types :
  • Clicker 7
  • Clicker 8 for Windows / Mac
  • DocsPlus for Windows / Mac
  • DocsPlus Universal for Windows / Mac
supportkeywords :
  • activation
  • activate
  • command line
  • command
  • C7WH15
Related support articles
Related support downloads
  

How do I activate via command line?

Nov 8, 2017, 16:04 PM
Article ID :
Priority : Normal
Type of article : How do I
Last revised : Dec 13, 2019, 00:00 AM

The software is installed but not activated on multiple Windows computers. This may be because the automatic activation was unsuccessful during installation. It may be because the software was included in a system image that was applied to client computers.

Resolution

Activation is performed by CrickActivate.exe in the software's Program Files folder.

It connects to activate.cricksoft.com/activate via HTTPS (Port 443).

You can use a logon script, Scheduled Task, Group Policy, or similar to run this program via command line on each workstation.

The following parameters must be used:

-serial   Your serial number (see examples).
-silent   The activation attempt won't display any messages.

The following parameters can be used if required:

-proxy   The address of a proxy server.
-user     The username to use when accessing the proxy server.
-pass     The password to use when accessing the proxy server.

Clicker 8 example:

"C:\Program Files (x86)\Crick Software\Clicker 8\CrickActivate.exe" -silent -serial "8XXXX XXXXX XXXXX XXXXX"

DocsPlus example

"C:\Program Files (x86)\Crick Software\DocsPlus\CrickActivate.exe" -silent -serial "2XXXX XXXXX XXXXX XXXXX" -proxy "10.0.0.254:8888" -user "myusername" -pass "mypassword"
Product Types :
  • Clicker 7
  • Clicker 8 for Windows / Mac
  • DocsPlus for Windows / Mac
  • DocsPlus Universal for Windows / Mac
supportkeywords :
  • activation
  • activate
  • command line
  • command
  • C7WH15
Related support articles
Related support downloads
  

Additional voices

Search support
  
Get assistance

If you can't find a support article which solves your question or problem, please contact our friendly support team.

Contact Support