USB Keys for Windows / Mac

For Crick USB Switch Boxes purchased before August 2021.

  

How do I adjust the timing of switch presses?

You want to improve switch accessibility in Clicker or DocsPlus (for Windows / Mac).

Resolution

Some users have difficulty pressing switches reliably.

Clicker / DocsPlus include timing settings that can be adjusted to suit these users (providing a Crick Switch Box is used).

The table below lists various issues and the corresponding settings that can help.

To view these settings, open the Options ribbon tab and click Access. On the Access Method tab, choose One Switch or Two Switches, and then click Timings.

Issue Solution Effect Result

Items scan too quickly.
(Single Switch only)

Increase the Auto Scanning Time.

Increases the time an item is highlighted before the scan moves on.

The scan moves slower.

User accidentally presses switches.

Increase the Hold Duration.

Increases the time a switch must be held down before the press is accepted.

Accidental presses are ignored because they aren’t held down long enough.

When purposefully pressing a switch, the user accidentally presses it multiple times.

Increase the Ignore Repeat.

(Must be higher than Hold Duration)

Increases the duration in which multiple presses are treated as one.

Accidental presses are ignored because they occur too soon after the first press.

The scan starts before the user is ready.

(Single Switch only)

Option 1.
Choose Start scanning after X seconds.

The scan pauses on the first item for X seconds before moving on.

The user has X seconds to prepare for the scan.

Option 2.
Choose Press switch to start scanning.

The scan doesn’t start until a switch is pressed.

The user can start the scan when they are ready.

When purposefully pressing a switch, it takes time for the user to stop pressing.

On the Access Method tab, click Switches.

Option 1.

Increase the Auto-repeat Delay.

(Auto-repeat must be enabled for switches, see below)

Increases the time before a held down switch repeats a press.

Accidental repeated presses are prevented because the first press isn’t held down long enough.

Option 2.

For each switch, uncheck Auto-repeat when switch X is held down.

Disables auto-repeat. Auto-repeat Delay no longer has an effect.

Presses don’t repeat, no matter how long a switch is held down.


About this article
Published
December 4, 2017
Last revised
April 11, 2021
Applies to
  • Clicker for Windows / Mac
  • DocsPlus for Windows / Mac
  • USB Keys
Keywords
  
Search support
Get assistance

If you can't find a support article which solves your question or problem, please contact our friendly support team.

Contact Support